![]() ![]() If the engine fails to start within 30 seconds, release the start button and allow the starter motors to cool 2 minutes before repeating the starting procedure. 6. As soon as the engine starts, release the button. 7. Check the oil pressure gauge or the oil pressure light. 8. Reduce engine speed to low idle and allow the engine to warm.Īir Starting 1. Fill the oiler. See the LUBRICATION AND MAINTENANCE CHART for proper oil to use.Ģ. Check the air supply. The air starter must have 100 PSI available for starting. 4. Prepare the locomotive for starting as recommended by other manufacturers.ģ. Perform all cab starting procedures as per locomotive instructions. 5. Move the control handle to approximate half engine speed position. 6. Turn the master electrical control switch to ON position, if so equipped. 7. Pull upward on the air starter valve lever located on the engine, or operate the air starter control provided in the cab. 8. As soon as the engine starts:Ī. Release the air starter valve lever. b. Check the low oil pressure gauge or the oil pressure light. If no oil pressure is indicated and immediate stopping action has not been taken, the oil pressure safety shutoff control should stop the engine in approximately 7 seconds. c. Reduce engine speed to low idle and allow the engine to warm. ![]() The D399 Engine uses a prelube pump to lubricate all moving engine parts prior to starting the engine. To start a D399 Engine, follow the Electric or Air Starting instructions as required. #CAT D399 ENGINE SPECIFICATIONS GENERATOR#. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |